Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My 1.6 gal Kohler will not fill the bowl properly. It does not leak down.
[ 2 Answers ]
Is this a manufacturer defect in design? This toilet is new, but was missing the flush valve. We used the newly replaced flush valve from the old toilet. Inside the tank of this toilet is a rectangle fill box with the 1/8" tube to fill it as the tank fills, water also goes into the bowl. If we set...
Replacing hoses under sink and installing shut-off valve
[ 6 Answers ]
Hello, I'm getting ready to "cut" the rubber hose under the bath room sink to install shut-off valves. Here's a little history for you... I replaced the old facet about a month ago and had no leaks... well, guess what it's been leaking and wife's not happy. I'm really worried about cutting...
Toilet don't flush properly
[ 1 Answers ]
The "whirlpool" action seems to work fine but all the water don't go out of the bowl. Could it be the little hole at the bottom of the bowl? What is that for? Plenty of water in the tank and it all empties out OK, just won't go all the way down. Can't afford a plumber so any help would be great.... View more questions Search
|