Ask Experts Questions for FREE Help !
Ask
    coltonjared's Avatar
    coltonjared Posts: 66, Reputation: 4
    Junior Member
     
    #1

    Mar 31, 2007, 07:19 PM
    Pool wall bent in
    I thinking of getting a used 18x4 pool that's been standing for years and the wall has fell in half way and the part that's standing the wall gone inward, anyway is the pool useable?
    coltonjared's Avatar
    coltonjared Posts: 66, Reputation: 4
    Junior Member
     
    #2

    Jul 24, 2007, 08:21 PM

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Bent turbine [ 2 Answers ]

What if you clean the air filter regularly? Can it happen from when the rod was replaced? The oil started leaking from the turbo base right after the initial repair of the worn out rod that caused the oil to originally leak. Then there was a vibration noise for about six months that continually...

Bent turbine blades in a 2000 7.3 turbo [ 1 Answers ]

What can damage the turbines on the turbo for a 7.3 ford diesel. This is a 2000 that had to have the "rod"? Replaced which right after the bolts on the turbo came loose and caused the turbo to come loose causing vibration that caused the new "rod"? Loose and damage the rod and somehow two blades...

Bent copper tubing riser [ 6 Answers ]

Hi all. We had a toilet leak in our upstairs bathroom. We've had a couple of plumbers out over the past couple of years to deal with the problem, but their work didn't fix the problem. As a result, our linoleum discolored and the floor got weak. We spent the day yesterday pulling up the...

Above ground pool retaining wall [ 2 Answers ]

Please send me information regarding retaining walls for above ground pools. I am having a difficult time with my community and my above ground pool. I am going to have to install a retaining wall around me entire pool, as well as back fill dirt Could you forward any information that you may...

Replacing a Bent Flange [ 5 Answers ]

Hi, we are completely remodeling our bathroom and are almost to the steps of installing the new toilet. When we test fit it to make sure there would be enough space between it and the vanity, the toilet rocked pretty badly. We did not have a wax ring underneath when we test fit it, but upon...


View more questions Search