Ask Experts Questions for FREE Help !
Ask
    guitarzan's Avatar
    guitarzan Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 31, 2006, 12:30 PM
    Jetted tub
    I have a hydro massage tub made by better baths components and the on\off switch doesn't work. The pump works but I have to hit the circuit breaker to turn it on and off? Any help?

Check out some similar questions!

Jetted tub [ 3 Answers ]

Jetted tub made by better bats components, won turn on or shut off unless I use circuit breaker?

Another Jetted tub question [ 3 Answers ]

I am also installing a jetted tub with an in-line heater. American Standard recommends using 2 circuits, one for the heater and one for the pump. I ran 20 amp circuits, even though 15 amp is all that was required. I am using GF CB and not GFI's as I don't want anyone to be tempted reset the...

Bathtub heated and jetted [ 4 Answers ]

The bathtub requires 2 20amp circuits. One for the pump and the other for the heater. I am going to install a 2 gang box with 2 gfi receptacles. Can I run 12-3 wire and have the 2 GFI breakers share the same neutral wire? Thanks for your help


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.