 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Jacuzzi - Have circulation but no heat?
I turn the power on and the jacuzzi starts and a small pump, under the light, starts and then it goes for about 15 seconds and then resets itself and repeats. There is flow coming out of the heater and pump #1 but the heater doesn't turn on, or at least the 'light' is not coming on. Anyone have any idea what the 'next' steps would be?? Just got laid off and can't afford a repairman... lol
|
||||
Check out some similar questions!
I have a split level house with a wood stove in the basement,I've tried a fan and a celing fan but the heat seems to stop at the top of stairs.I don't want to put a vent in the floor if I don't have to need some ideas.
I have a single stage heat pump and a hunter model #44360 thermostat. Put in this summer, worked fine all summer. Now that we want to use the heat, an issue has come up. The unit kicks on and heats to the desired temp. Then the unit shuts off. The fan for circulationg the air however does not....
I've searched a bunch of other threads that touch on this subject, but they don't quite answer my specific issue with circulation of wood stove heat. Most have said that with a forced air furnace system, the fan could be set to on, and that would circulate the heat. We're building a new house with...
I have a coal fired boiler, 4 zone , baseboard hot water system. Last year I changed it from a single circulator with 4 zone valves to 4 separate taco 007 pumps. Everything works fine except two of the zones appear to be circulating hot water without the pump running over a period. Ex: When...
I have a home with a ceiling approximately 17 foot ceiling. The house is heated from the top or attic. At approximately 8pm even though the thermostat indicates 70 degree, the house feels like 60. Is there anyway that I can improve the heat circulation so that the entire house is 70 degrees ? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
