Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How does a shower diverter work
[ 0 Answers ]
My shower diverter is activated by pulling up the stem located in the faucet spout. The existinb diverter has been in service for 30 years without any service. My problem is that from full strong shower head output, all of a sudden the output reduced at leaset 50 %, a spray that hardly will rinse...
Shower diverter valve does not work properly
[ 5 Answers ]
My shower diverter valve does not work properly. It allows water to flow from the tub nozzle and the shower head when the diverter is for shower only, when turned to tub only water will come out of tub nozzle like it should, The diverter is a turn valve, I believe compression type, I Purchased...
DH replaced shower/bath DIVERTER w_ all new parts- STILL doesn't work!
[ 10 Answers ]
SITUATION: We have 2 houses that both have the SAME shower/bath diverter problem. (Houses differ in age and water pressure so I seriously doubt it's 'their' problem.) My husband replaced the diverters with all new parts in each of the houses... :confused: WHY are we still getting water...
Shower diverter turns but doesn't work!
[ 1 Answers ]
We bought a house for our daughter and in both bathrooms the shower diverter is not working. It is the type that turns from left to right but actually it now turns all the way around. On one of the two you can get it to work if you tweak it just right, but the other isn't working at all. I do not...
Shower Diverter Won't Work
[ 2 Answers ]
Hello - the faucet in my shower is the type where you pull down the spout and then the water comes out of the shower. It worked, and then five minutes later when I wanted to use it again, it didn't work! The pull down just didn't seem to catch. Is this something that I can replace on my own? Are... View more questions Search
|