 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What is the standpipe height for under counter washing machine
Is there a correct height to keep from over flowing the washer drain pipe on an under counter installation. I am having problems with it periodically overflowing onto the floor! It is in a basement location if that makes a difference!
|
||||
|
||||
|
You are not telling us what kind of washing machine you plan on using. Usually, domestically manufactured washing machines are about 41" high. Some European models like Miele and Bosh are true under-the-counter units and are about 34" tall. UPC says you have to have 2" vertical section of pipe that is 30" long ( don't confuse this dimension with overall height ). With trap, this will end up about 36" high. That will not do too good for you since you want to install it under the counter. I have seen stand pipe shorter - but you are running risk of overflow. Some plumbers attach and seal W/M discharge hose to the stand pipe with special Fernco coupling so if overflow should occur it will not spill behind the washer. Also, if you are on raised foundation, you could drop trap bellow the floor. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Last week our washing machine drain overflowed. The plumber tried to snake it out, but the problem only became worse (i.e. no flow at all any more). He opened up the drywall and discovered a very corroded cast iron pipe going horizontally from the standpipe via a trap to a T at a vertical pipe...
I am installing a washing machine in the basement and the sewage drain pipe is at a height of 5 feet off the floor. From everything I have read, the standpipe should be above the height of the washer tub and it should be 2" in diameter. Could I install the washer without having a external pump...
We just moved and we brought or whirlpool washing machine with us. We never had any problems with leaking in the past, but now there is water all over the floor. I discovered that water is partially running out of the drain hose instead of draining down the standpipe. I'm not sure if anything...
Hi, I'm putting in a new washing machine tomorrow, and would like to ask how much higher should the standpipe be? I am including a link with 2 pictures of how it is presently.(I have moved the electrical receptacle). In the picture, the distance from the top of the standpipe to the bottom of the...
View more questions Search
|
