Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to change threaded tub spout to slip on type tub spout?
[ 1 Answers ]
I want to change the tub spout from the thread on type to the slip on type. Does the thread on type have a thread inside the wall that I can take out and install a 1/2" copper line with MIP?
Tub spout leaking at the allen key hole when water is turned on
[ 1 Answers ]
My danze tub spout is leaking at the allen key hole when the water is turned on. How do I fix it or is this normal?
Can I replace a slip on tub spout with no diverter to a tub spout with a diverter?
[ 1 Answers ]
I have a slip on tub spout that has no diverter. I would like to exchange this tub spout with one that has a diverter.
Removal of tub spout diverter with hole underneath
[ 1 Answers ]
I have a tub spout diverter that has a hole in the bottom. I need to know what the mechanism looks like so I can figure out how to remove it and then unscrew it to put on a new one. There is a hole in the bottom of the unit but it is too close to the wall and I can not look in it to see what...
Removing bathtub spout - no hole
[ 5 Answers ]
Hi, I have read the Q/A's on the site, but can't find an answer to this one. First, I have a Delta faucet. It looks like Delta Faucet T13422-SOS on the www.deltafaucet.com website. (There are a few more that look like this, but it has the diverter plug on the spout.) The difference is that... View more questions Search
|