My Water softener spewed media into my supply lines. All of my cold water faucets are running slowly or not at all. How should I go about unclogging the supply lines?:confused:
Add your answer here.
Check out some similar questions!
Water softener resin clogging water supply lines [ 1 Answers ]
We have a water softener that has a resin filter that has broken numerous times due to surges in water pressure. This time we didn't realize it had broken in time to bypass the softener and avoid getting resin in the lines again. We've already flushed the resin out of the 2 toilets and 2 sinks...
Connecting Copper Supply Lines to Brass Supply Lines [ 3 Answers ]
I have just started remodeling my kitchen and am looking to move my kitchen sink further down the wall. The kitchen is completely gutted at this point. The supply lines in my house are all brass. I'm looking to stem off the brass lines using copper tubing. Is it possible to cut the brass supply...
Using PEX for water supply lines [ 14 Answers ]
I am thinking about using PEX lines for my new basement bathroom. Are there different grades of PEX and if so which should I use. Is the PEX that a Home Depot or Lowe's sell any good. Thanks
Hard water deposits clogging our lines [ 8 Answers ]
Every time we shut off the main water line to work on our water lines we get hard water deposits flooding our lines and clogging. We replaced our floor around the toilet, but there is so much deposit that it is now clogging our lines and neither of our toilets now work (we put new parts in the...
Disinfecting new water supply lines [ 3 Answers ]
I am replacing the old Galv and copper supply lines with PEX and before I connect to the city supply, I am told I need to disinfect the lines. Can anyone tell me what type of solution I should use and for how long? I see one reference to this and it call for full strength bleach. Thanks
View more questions Search