Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Why did my water pressure drop when I bypassed my water softener?
[ 3 Answers ]
I bypassed my water softener and the water pressure in the entire house dropped. I though the opposite usually happens? Anyone have any ideas? Thank you!
Water softener resin clogging water supply lines
[ 1 Answers ]
We have a water softener that has a resin filter that has broken numerous times due to surges in water pressure. This time we didn't realize it had broken in time to bypass the softener and avoid getting resin in the lines again. We've already flushed the resin out of the 2 toilets and 2 sinks...
Constant running water noise, old water softener pipes?
[ 3 Answers ]
When we bought our house, it came with a decommissioned water softener in the laundry room. The pipes behind it (I'm assuming in and out) were capped off with plastic plugs that toggle back and forth. If you're familiar with Dr. Dolittle, I'd call it a pushmi-pullyu setup. (sorry, I'm an admin, not...
Salt from water softener contaminated hot water pipes
[ 1 Answers ]
Since I could not lift bags of salt to fill the container of my water softener, I just unplugged the softener instead of turning off the main valve; therefore, apparently the water continued to flow through the remaining salt until it was gone. In the last year, I have been through two brand new...
Rainsoft Water Softener - Salt tank not filling with water?
[ 1 Answers ]
Put a bag of salt in my softener today and it appeared to be way over the brine level. Checked on it a few hours later and still had dry pellets on top. Manually regenerated the system - no fill. Letting it go through its cycle now, but wondering if there's something I'm overlooking. There's... View more questions Search
|