In replacing a broken drain pipe in bathroom sink, I discovered that the original plumber used plumber's putty to seal the join between the 1-1/4" metal drain pipe and the 1-1/2" PVC pipe leading to the PVC P trap. I know not to use plumber's putty on PVC, but since two different sized pipes were...

Is there a glue on the market that joins metal to pvc I need to connect a 50mm pvc pipe to a 60mm metal pipe I have a connector (pvc) that will connect perfectly its got thread but the 60mm metal pipe is plain on the inside I have tried silicone but it can not handle the pressure. I am connecting a...

I am replacing the drain in the bathroom lavatory. Is it OK to connect PVC to the existing metal pipe in the wall?

Was digging in the yard and broke the PVC pipe connected to a metal pipe inside the joint. The PVC and joint is 3/4 inch however the PVC is glued inside the metal and now I can't get the old PVC out of the metal joint to replace it. I don't have any tools to cut the metal pipe. Is there anything...

I am currently going to be installing a new well water pressure tank and of course a new tee, cross, or manifold for the well water plumbing system of my house. I will essentially start with a new water well tank using a reputable brand name consisting of wound fibreglass and plastic this time...