Ask Experts Questions for FREE Help !
Ask
    Ozmos's Avatar
    Ozmos Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 26, 2017, 10:47 PM
    Water line connections
    Is it OK to use yellow gas thread tape on water line connections?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 27, 2017, 09:09 AM
    Yes. Oatey info sheet lists water under uses. Yellow it a thicker teflor tape that doesn't shred

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fuel line connections [ 1 Answers ]

On the fuel pump.the line from tank enters the port on the left (horizontal). Where does the bottom port (vertical) go? Briggs & Strotton,Model 402707 Type 1212-01 Code94100454. THangs Don

Water Valve Connections [ 2 Answers ]

I have a GE TPS24BPDABS refrigerator and needed to repair some cracked water supply lines. I think I may have switched the 1/4" lines when I reconnected them to the valve because the water dispenser ran without being pushed on. I have tried to find a schematic as to what supply lines connect to...

Hard water line sputters - soft water line does not [ 2 Answers ]

Neighbor came over asking for help. They have soft water throughout the house and hard water to the outside spigots. I stood on their basement steps and watched as he turned on a spigot in the basement hooked to the soft water line and then he went outside and turned on a hose attached to the hard...

Fuel line connections of diesel engines [ 0 Answers ]

In one book I read " The fuel lines connecting the fuel injection pump individual elements with corresponding injector should have equal length". Is it right. or the lines have variable length.. why?

Lavatory water connections [ 3 Answers ]

I recently had a water connector to a pedestal sink blow out and I need to replace it. It is the type of connection that is exposed to view and is ornamental. The valve is antique, polished brass with connections that are adjustable. It is 1/2 od connections. Any thoughts as to where this type...


View more questions Search