Ask Experts Questions for FREE Help !
Ask
    MGA1962's Avatar
    MGA1962 Posts: 3, Reputation: 1
    New Member
     
    #1

    Dec 4, 2013, 12:58 PM
    Water heater
    I just had my home re-piped and a water heater was installed. When the plumbers left, I washed dishes and noticed the flow of hot water decreasing. When I checked the water heater, the cold water intake valve was closed. I turned it on and have hot water, but wonder what damage was caused to the hot water heater. Any ideas?
    I called the company and they said they will send out a technician tomorrow to check the heater which has a six-year warranty. What would they be able to determine?

    Thanks
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Dec 4, 2013, 01:11 PM
    The water heater should not have gone dry... as they typically feed out the top and water is pushed out by the pressure of the incoming cold water. So it wasn't being displaced by air or anything that would have left the heating elements exposed.

    There really should not be any damage.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #3

    Dec 4, 2013, 01:35 PM
    I don't know if it is quite that easy an answer, Smoothy... ;) It certainly could be, too, but let me double check a bit here...

    The first thing I would need to know is if this was an electric or a gas water heater (Smoothy assumed electric).

    Next, I would want to know how long you had to leave your faucet open to get running water AFTER you opened the "cold water intake valve". Was it a long time and you had tons of air spitting out for a long time until you got the water flowing properly and hot or was hot water flow almost instantaneous, or was there just cold water after the air cleared the lines?

    After we get these answers we can tell you more, OK?

    Mark
    MGA1962's Avatar
    MGA1962 Posts: 3, Reputation: 1
    New Member
     
    #4

    Dec 5, 2013, 07:39 AM
    Hi Smoothy and Mark
    Thank you for your answers. It is an electric heater. I am pretty sure I got hot water soon after opening the valve.
    Mike
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #5

    Dec 5, 2013, 07:50 AM
    Hi Mike,
    Is sounds like no damage was done. If you're getting hot water and it doesn't turn cool right away. Then the top element is still working. This time you luck out.
    Always nice to see a happy ending. Good luck, Tom
    MGA1962's Avatar
    MGA1962 Posts: 3, Reputation: 1
    New Member
     
    #6

    Dec 5, 2013, 04:36 PM
    Thanks Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The water heater nipples leak at the union of the water heater. Not the flex lines. [ 2 Answers ]

We installed a water heater and we attached the nipples using sealing tape. The nipples leak where attached to the heater. The threads are clean and even on the nipples and feel the same on the inside of the water heater. What could be causing them to leak?

No or very slow hot water from gas water heater, heater makes lot of sounds [ 1 Answers ]

There is problem with our hot water system, not getting hot water while as cold water is OK. Starting hot water there is lot of explosion sort of sounds from water cylinder and hot water will start dribbling and stops after some time.

Water heater leak (cold side only) where the nipple meets the water heater [ 9 Answers ]

I just bought a water heater and completely installed it. When I turned on the water supply, a very very very slow drip can be observed where the cold water nipple screws into the water heater. I shut off the water, relieved the pressure and unscrewed the nipple. I then re-apply the teflon tape...

Tankless water heater versus regular water heater [ 2 Answers ]

I need to know basic water heater tank maintenance

Connecting a tankless water heater and separate hot water heater [ 6 Answers ]

What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...


View more questions Search