I have replaced the diverter but the problem is no better... the tub faucet will work properly when diverted but when the shower is completely diverted the tub faucet releases a large amount of water.. any ideas , please...
Add your answer here.
Check out some similar questions!
New delta shower/tub faucet only lukewarm water no hot! Help [ 4 Answers ]
Putting in a new shower faucet, it's a dial 2 in one type.. We had hot water before, but now with the new faucet we only have lukewarm.. is there anything I can do to fix this?
Tub to tub/shower conversion: Need to re-route water lines for a shower faucet? [ 12 Answers ]
Hello everyone, My wife and I just moved into an old (1930s) Spanish house in Los Angeles. We have 2 bathrooms, with the master bathroom containing a bathtub and a separate shower stall. The shower stall is tight with a low ceiling and the bathroom has no exhaust fan (only 2 windows) and...
Low water pressure at shower head and tub faucet [ 1 Answers ]
I had good water pressure but it has become less and less,so I removed the valves in the cold and hot handles figuring there was debris to be flushed out. When I turned water on with valves out the stream hit the back of the tub (about 5 feet). I flushed them out for a few minutes (rusty water,...
Low water pressure after replacing tub/shower faucet [ 2 Answers ]
I recently changed my old twin-ell diverter spout tub faucet to a more modern shower head and ejector tee diverter type. I kept the twin-ell part and kept the shower head port plugged on the new faucet. I have very low water pressure now. If I take out the plug in the shower head port the...
View more questions Search