Hi I am new and wondering if I can plumb a utility sink drain into a washing machine stand pipe? http://www.treemo.com/content/874630_2egnek0gmxuwi_dd.jpg The sink will be located to the left just past the wall. The drain pipe is has a trap just past where I cut the drywall out on the right. Can...

I'd like to install a utility sink in the basement and have attached a drawing illustrating the current piping and proposed attachment. Basically, the kitchen sink drain goes directly into a drain in the basement floor via a 1-1/2" steel pipe, which is tied to the sewer system. I'd like to put a...

I have seen a number of posts about installing a utility sink in a laundy room. I would like to do the same, but here is the difference. It is no longer a laundry room. So how can I hook up the sink to the old landry supplies and drain as easily as possible without the added complexity of it...

I desire to hook up a utility sink nedst to the existing clothes washer in an enclosed garage area. The washer has existing hot and cold supply lines coming from the wall with a ¾” brass bibb. Can I, and if so, how, can I connect hot and cold lines to the utility sink. It has a standard type...

I have a utility sink in my walk-out basement - that sink's 1.5 inch drain connection is approx. 18" above the floor, into a two inch horizontal run. This 2 inch horizontal PVC runs about 3 feet, then connects to a main 3" DWV. I would like to add a bar sink, set into a standard height (36")...