Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kitchen Faucet Diverter Installation
[ 1 Answers ]
We recently installed a new Corrego Kitchen Faucet Model #F87B4500BNC, and found we had very low pressure, so we called the company and they said that we needed a diverter so they mailed it to us. No instructions came with the diverter, so we need to know where and how to install the diverter. ...
Installation of Wall-mounted Rear-discharge Toilets
[ 2 Answers ]
Hi Folks, I'm looking at either the 1) Geberit pressure-assist wall-mounted toilet or 2) Porcher Kimera wall-mounted toilet. In either case, I would use a horizontal discharge configuration. 1) QUESTION: Does the Kimera support a horizontal discharge configuration? If so, does it travel...
Hose Bib installation in wall
[ 1 Answers ]
I'm remodeling a house and wondering if there is a way to install an external hose bib inside a 2x4 wall. On one of them I just need cold water. The other one, I'd like to do hot and cold with a mixer valve of some sort. I have exposed walls and already have the water line in the wall (I'm using...
Unconventional faucet installation
[ 1 Answers ]
I am installing a drop-in whirlpool. My wife has shown me design book pictures of two handle tub fillers installed with the spout in a different location away from the handles. Can off the shelf deck mount tub filler kits from Kohler or American Standard be adapted to this kind of installation or...
Bathroom faucet drainpipe broken behind wall
[ 11 Answers ]
1941 two-story house, working in 1st floor bathroom. While replacing a bathroom faucet, I discovered that the drain pipe going into the wall was broken in half, this is the piece behind the p-trap. The place that is broken is just behind the tile bathroom wall. I pulled one pipe half from the... View more questions Search
|