My pop-up drain in stuck in the closed position... it shoul open by pushing it down with your thumb but it won't pop back up... what can I do?
Add your answer here.
Check out some similar questions!
Install Vessel sink and drain with overflow [ 4 Answers ]
I have a china vessel sink with overflow sitting on a granite top. The drain fits through the hole but if I use the cone gasket between the sink and the granite top, the sink will be elevated about 1/4 inch and will not sit flat. If I install the silicone cone gasket under the granite then...
Installing pop up drain in new vessel sink [ 4 Answers ]
I am refurbishing my bathroom and installing a vessel sink. It came with the drain, a pop up drain, but it did not come with the instructions for installing this drain. It appears simple enough, but I do not want to install it incorrectly and experience any leaking around the vainity top I made...
What drain should I use for a vessel sink [ 5 Answers ]
I've been told you need to use a special drain for vessel sinks to get them to drain. What are some of the recommended brands that work well in this application? Doug
Installing new pop up drain in bathroom sink [ 2 Answers ]
We are installing new pop up drains (the kind you push down on to close and open) on new sinks without overflow. The drain part sticks up about an eighth of an inch from the sink so after it drains there is always a little pool of water around the drain. The drain came with two rubber washers, one...
Drain for Vessel Sink [ 1 Answers ]
I just received my vessel sink and now need to purchase the right drain... The actual opening measures 1 3/4" and the recess for the flange/trim is 2 3/4". The various drains I've been looking at measure 1 1/4", 1 1/2" or 1 3/4". Am I limited to 1 3/4" drains or can I use one smaller? Also, my...
View more questions Search