Ask Experts Questions for FREE Help !
Ask
    sodler's Avatar
    sodler Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 5, 2008, 07:34 AM
    Using Pex with a Water Softener System
    I am considering replacing a galvanized plumbing system with PEX. I have a water softener that uses salt pellets which I switched to using Potassium Chloride as opposed to 100% salt.

    Can pex be used with this water softener system?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Aug 5, 2008, 09:16 AM
    No problem but be sure you buy AquaPEX and not something designed for radiant heat.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water softener resin clogging water supply lines [ 1 Answers ]

We have a water softener that has a resin filter that has broken numerous times due to surges in water pressure. This time we didn't realize it had broken in time to bypass the softener and avoid getting resin in the lines again. We've already flushed the resin out of the 2 toilets and 2 sinks...

Constant running water noise, old water softener pipes? [ 3 Answers ]

When we bought our house, it came with a decommissioned water softener in the laundry room. The pipes behind it (I'm assuming in and out) were capped off with plastic plugs that toggle back and forth. If you're familiar with Dr. Dolittle, I'd call it a pushmi-pullyu setup. (sorry, I'm an admin, not...

Water line to water softener size. [ 9 Answers ]

I'm installing a water softener this weekend and I just had a quick question. My service at my house comes in as 3/4" then is reduced to 1/2" at the water meter (in basement). From there it comes off and runs throughout the house and to the water heater, etc. The water softener I have has a...


View more questions Search