Ask Experts Questions for FREE Help !
Ask
    Supra's Avatar
    Supra Posts: 4, Reputation: 1
    New Member
     
    #1

    Jan 29, 2006, 12:48 PM
    Unicoupler Uncouples/Leaks
    Many thanks to Tom and Fr. Chuck for responding to my question about hooking up a portable washer to a sink that also has a sprayer hose, by suggesting that no problem exists in that regard. That is great news!

    However, I have another problem. I followed instructions that came with the tap adaptor and unicoupler exactly, and attached the washer-dryer's hose. When I turned on the tap to check for leaks as instructed, there was a leak that seemed to be coming from the unicoupler. THEN: the unicoupler uncoupled! I turned off the water, recoupled, and turned on the water again at a lower pressure. The leaking increased. So here I am again with having spent $1,500 on a machine I cannot use.:confused: :confused:

    Maybe they sent me a defective unicoupler? Maybe I need to buy some Teflon tape to prevent leaks from the unicoupler? Any advice you can provide would be a big help.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jan 29, 2006, 03:56 PM
    Quote Originally Posted by Supra
    Many thanks to Tom and Fr. Chuck for responding to my question about hooking up a portable washer to a sink that also has a sprayer hose, by suggesting that no problem exists in that regard. That is great news!

    However, I have another problem. I followed instructions that came with the tap adaptor and unicoupler exactly, and attached the washer-dryer's hose. When I turned on the tap to check for leaks as instructed, there was a leak that seemed to be coming from the unicoupler. THEN: the unicoupler uncoupled! I turned off the water, recoupled, and turned on the water again at a lower pressure. The leaking increased. So here I am again with having spent $1,500 on a machine I cannot use.:confused: :confused:

    Maybe they sent me a defective unicoupler? Maybe I need to buy some Teflon tape to prevent leaks from the unicoupler? Any advice you can provide would be a big help.
    Can you scan and send me the details on conecting to a kitchen sink tap and perhaps a digital picture of the tap adapter and uncoupler ? I pulled the installation instructions but it told me to connect to a cold water hose bib that's fed by a 3/4" supply.
    I warns against overtightening on the instructions but says nothing about connecting to a kitchen sink tap spout. Can you shed some light on this?
    Regards, Tom
    Supra's Avatar
    Supra Posts: 4, Reputation: 1
    New Member
     
    #3

    Jan 29, 2006, 05:14 PM
    Quote Originally Posted by speedball1
    Can you scan and send me the details on conecting to a kitchen sink tap and perhaps a digital picture of the tap adapter and uncoupler ? I pulled the installation instructions but it told me to connect to a cold water hose bib that's fed by a 3/4" supply.
    I warns against overtightening on the instructions but says nothing about connecting to a kitchen sink tap spout. Can you shed some light on this?
    Regards, Tom
    Tom,

    The only info. I've been able to find on my leak problem is here:
    http://www.appliance411.com/faq/unicouple-repair.shtml
    Here's a picture of my tap adaptor:
    http://www.repairclinic.com/0081.asp?RccPartID=2239
    This site doesn't have a picture of my unicouple. Theirs come with hoses. My hose just attaches to the end of the unicouple. They sell "repair kit" for my unicouple, but I refuse to pay to repair any part of something I just spent $1,500 on. I'll send back the defective unicoupler if necessary.

    Here's where I bought the Supra:
    http://www.compactappliance.com/xq/J...ct/product.htm

    If you click on Quick Connect Faucet Adaptor, you will see the unicouple with the tap adaptor on top of it.

    Many thanks for your help. I suspect something is wrong with the Quick Connect's unicouple. Any advice you can provide would be a great help!

    Mera
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Jan 30, 2006, 02:56 PM
    Hi Mera,

    Almost lost you over here on page 2. Turn the faulty adapter in and get a new one. You don't fix those, you replace them. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bathtub leaks [ 9 Answers ]

I have a 2d floor bathtub with a shower. Whenever someone takes a bath, water leaks down to the 1st floor bathroom. It was so bad I had to have the ceiling in the downstairs bathroom replaced. This only happens when someone takes a bath, not when someone uses the shower. I recently had a plumber...

Toilet leaks [ 7 Answers ]

Hello. My tenant just phoned to say that the handle of the flush leaks when it is flushed. She also is noticing water around the base of the toilet. Just checking in to see what I should look for when I go over and what some possible solutions might be? Many thanks, JD

Auto leaks [ 1 Answers ]

How can I find the leak without spending big $$$$$$$$$$$$:o

New sprayer leaks [ 5 Answers ]

Hi, my husband just installed a new price fister faucet and sprayer. When the water is running from the faucet the sprayer leaks. Pressure seems fine in faucet and sprayer sprays fine but won't stop leaking unless you just let it hang in the sink then it stops... What should we look for? Thanks...

Basement leaks [ 1 Answers ]

Was wondering if anyone knows how to stop and old homes basement walls from leaking without digging foundation up and putting sewers and drains in there is no public sewers and I need to know how to stop the sepage. Thanks??


View more questions Search