Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Recirculating Pump Installation
[ 4 Answers ]
What is the proper and UBC method of installing a recirculating pump? A plumber submitted an estimate of $400 to correct what he called an improper existing installation. Currently the return line from the recirculating pump is plumbed into the cold water intake line at the top of the hot water...
Hot Water recirculating pump
[ 5 Answers ]
Howdy again, The hot water takes a long time to heat up due to the length of run from the water heater. So... Would installing a recirculating pump be a good idea? I have seen a type which connects the hot and cold and pushed the water from the hot side to the cold until it gets warm...
Tankless Water Heater and Recirculating Pump
[ 1 Answers ]
I want to replace my water heater with a Bosch AquaStar 1600H NG (Natural Gas) tankless water heater. Our hot water system has a recirculating pump, and, according to Bosch, the Bosch AquaStar 1600H NG system ignites the burners when water is flowing. My question is, will the recirculating pump...
Recirculating pump
[ 4 Answers ]
I have a recirculating line running into my hot water heater. I know for a fact that it has not had a pump attached to it for 20 years. I do not know if there was a problem with the line before or if the pump just bit the dust and was taken off. Should I be concerned about attaching a pump and...
Hot water recirculating pumps do work, but
[ 2 Answers ]
I can attest that the installation of a hot water recirculating pump (and sensor valve) does work. Hot water very quickly for the morning shower, really! However,. The 'however' is that I find that while the pump is on (in the AM for ~1-1.5 hr.), the hot water and cold water mixing in the... View more questions Search
|