Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing black adhesive from floor before installing new vinyl tile
[ 6 Answers ]
I have a bathroom (at the church I belong to) that has a hard type of vinyl tile in it. A toilet has overflowed 2 times in the past and flooded the floor. As a result, a lot of the tile has come loose. I have the replacement VINYL tile, but need to know how to continue. Under the tile is black...
Height of toilet flange above new tile - additional question
[ 1 Answers ]
Hello... I just read the question (posted July 18) on this subject and the answer by rickj. I was glad to see it and agree with everything, but when looking at the bottom of my new Kohler toilet, it seems that the 1 inch thick wax ring is going to have to be compressed down to only about 1/8...
Toilet installation
[ 1 Answers ]
I want to convert a closet into a bathroom. I live in an old high rise (circa 1925) with stacked plumbing and cement subfloors. The closet backs up to another bathroom, so I can tap into the sewage and feed pipes. The question is how to install the toilet. There is not a crawl space below my...
Installing new tile on top of shower pan
[ 2 Answers ]
I am going to be installing tile over durock cement board which sits on the top edge of my shower pan and just slightly over hangs into shower pan. Should I rest the starter row of tiles down on the cultured marble shower pan which has a 1/2 in lip or should I leave maybe 1/8 gap and if so what do...
Installing new tile shower walls
[ 2 Answers ]
I am installing new tile on top of a new cultured marble shower pan. I rested the durock on the top lip of the shower pan as directed by company. Its now time to tile the walls. Should I rest the first row of tiles directly on top of the shower pan or should I lift the first row up just a little... View more questions Search
|