I'm remodeling my bathroom. I've removed the old toilet and dug up the old flooring and subflooring. Together they were about 7/8" in thickness. Since I will now have a lower floor, what do I do to put in a new toilet flange? The old one was brass and only 1/4" thick and simply had the drain...

Hello, I realized as I was installing the subfloor in my new bathroom that I had cut off the pvc to short. It is slightly lower that the subfloor. Is there a longer flange which will solve this problem or should I remove the floor add a coupling and more pvc to raise the height? Thanks, m2

Got a real newbie question. I'm in the final stages of finishing my basement and am turning my attention to the bathroom. Our house is about 6 years old and we had the builder rough-in a 1/2 bath for us (so venting and stub are already present). I have the closet flange just about ready to go...

Hi we are installing a toilet in the basement of our new home. There is already a 4 inch stub that was left by the contractors. I have a couple of questions. 1.What kind of flange do we need for it to be flush with the concrete? Should we just buy a 3" flange and glue it into the four inch...

I have just installed a new floor in the bathroom. What is the maximum space allowed between flange and bottom of toilet?