Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tiolet won't flush
[ 1 Answers ]
I have replaced the flapper on my toilet with the one with the small hole that suppose to take longer to close but it falls fast, I've tried adjusting the chain doesn't help. I've been getting so frustrated, please help.
Replacing tiolet
[ 3 Answers ]
I'd like to know if there is a way to replace the cast iron part that my toilet sits on on bolts down to? It has rusted away and the old home owners raised the floor only in the bathroom so we removed /busted up that concrete so now the toilet sits up about one inch to high any feed back would be...
Tiolet Clearances
[ 1 Answers ]
I am putting a 1/2 bath in a unfinished basement. The house has a rough in for the bath with a tiolet opening in the floor. My question is what is the distance between the centerline of the drain and the wall in front of the tiolet. I know the back wall should be 12" from the centerline and...
Tiolet plugs up
[ 6 Answers ]
I have a tiolet that is suppose to use less water. It plugs up so bad that you have to flush it at least twice every time. Is this just the way they work and do I need to just replace it? It has plugged up since it was first installed.
Tiolet flange problem
[ 1 Answers ]
I have a problem with my tiolet flange or pipe, my tiolet was rocking back and forth. I removed the tiolet to replace the flange and everything came up at the same time. After inspecting the floor I noticed a semi flange, looks like a flange. After two trips to Home depot, I came back to see what... View more questions Search
|