Ask Experts Questions for FREE Help !
Ask
    zimp's Avatar
    zimp Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2006, 05:01 PM
    Thermocouple... can you test?
    I had a problem with my water heater. Its only 3 years old and when it got turned back on it worked for a bit then stopped. I then couldn't get the pilot light to stay on... held for many minutes. Being uneducated in water heaters I just assumed it was the thermocouple. As I started to dissasemble I noticed the sticker that said one time use over heat circuit. I then thought maybe it overheated. I took the control off and the thermocouple. I replaced both... fired it back up and again it only worked for a while before a few min then shut off and I now have the same problem. The pilot light won't stay lit. I started to investigate and found the overheat circuit was good... not the problem. I then wonder... do thermocouples go bad?. and if so is there a way to test them? Please help. Thank you, Charley
    marcoawg's Avatar
    marcoawg Posts: 7, Reputation: 2
    New Member
    		  
    #2

    Nov 5, 2006, 12:13 AM
    Quote Originally Posted by zimp
    I had a problem with my water heater. Its only 3 years old and when it got turned back on it worked for a bit then stopped. I then couldnt get the pilot light to stay on...held for many minutes. Being uneducated in water heaters I just assumed it was the thermocouple. As I started to dissasemble I noticed the sticker that said one time use over heat circuit. I then thought maybe it overheated. I took the control off and the thermocouple. I replaced both...fired it back up and again it only worked for a while before a few min then shut off and I now have the exact same problem. The pilot light wont stay lit. I started to investigate and found the overheat circuit was good...not the problem. I then wonder...do thermocouples go bad?...and if so is there a way to test them? Please help. Thank you, Charley
    Thermocouples are pretty robust. They can be tested if you know the type i.e.. J,K. a simple test may be to check if it is a closed circuit . I don't remember what resistance should be measured . You should be able to Google it. Check for any loose wiring.
    zimp's Avatar
    zimp Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Nov 5, 2006, 05:42 AM
    Thank you. I just replaced the new thermocouple with another new one... and it works. Go figure. This thermocouple is the standard whirpool water heater one. Copper tube and I believe it works with dissimilar metals... one expanding at a different rate than the other thus moving the silver tip just enough to open pilot lite valve.. Not too sure but that's my best guess. Anyway I'm showering with hot water today. Thanks for your help. Charley
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Test [ 4 Answers ]

Test:confused: :confused: :rolleyes: :D :D http://www.lunarforums.com/forum/Smileys/default/woot_jump.gif

What's the diff between diaelectric test and insulation test [ 1 Answers ]

I am puzzled, What exactly is the difference between diaelectric test and insulation test. Some says it the same, but others says it's because one applied power to perform the test the latter don't. And some says both are using power but one is using AC power and the other using Dc power. There...

Do I need to test? [ 3 Answers ]

I live in Virginia. My wife has just had a baby girl and there is a question of paternity. I am willing to accept this child as my own and have read that in Va, the husband is presumed to be the father. There is no father listed on the BC. Do I need to have a paternity test to have my name placed...

Test [ 2 Answers ]

This is a test

Thermocouple Installation Question [ 2 Answers ]

I just replaced a thermocouple using a Honeywell standard Thermocouple for a Genesis boiler and everything seems to be working fine. My concern is that I see a flame both at the end of the thermocouple and the base of the thermocouple. I own a three family and thus have three boilers one of...

View more questions Search