I am having trouble shutting off water supply to toilet can I still replace the flapper?
Add your answer here.
Check out some similar questions!
Toilet does not release all the tank water before flapper closes. [ 3 Answers ]
Toilet flush only uses about a fourth of the tank before flapper shuts. I have to continue to hold the handle down to flush completely. If this is done the toilet flushes with no problem. I have replaced the flapper and adjusted the chain to both short and long but nothing helps. I need to...
Turning off water supply to toilet that has no handle but a pull switch [ 8 Answers ]
Im trying to figure out how to replace the seal inside the toilet but have to figure out how to shut water off to the toilet first and there is no handle to shut off. There is a plastic piece that says pull to close? Tried to pull and it does not move?
How do I get rid of water hammer when turning on supply line to toilet? [ 9 Answers ]
Yesterday I went to replace the flapper in an upstairs toilet. That went smoothly. Then I came downstairs to replace the ballcock in a toilet there. When I reconnected the water line and turned it on, there was a thunderous water hammer and naturally I turned it off for fear the house would...
Toilet valve not turning off water to toilet [ 1 Answers ]
Toilet valve will not turn off water to toilet... keeps running
Replace old toilet water supply pipes [ 1 Answers ]
The current pipes are fixed and will not reach the new toilet installed. The new supply line does not look like it will attach at the lower end. Will the shut off on the supply take care of leaking while I work on the line? WIll I need to shut off water to the house? If the new flexible line...
View more questions Search