Ask Experts Questions for FREE Help !
Ask
    jamesbarden's Avatar
    jamesbarden Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 18, 2010, 12:41 PM
    Is there a tool I can buy to help install a moen 1222 cartridge.
    It's almost impossible to get the replacement cartridge back in. I finagled a C Clamp to get it in... and now 6 months later it is dripping.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 18, 2010, 01:15 PM
    There's a tool to extract a Moen cartridge, (see image) that I bet you'll be wanting in near future if you plan on doing your own work.
    If you had used the Silicon Jel that came with the cartridge and lubricated the "O" rings it should have slipped right in. You do know that Moen warrantees it's products for life. Call: 1-800-BUY-MOEN (1-800-289-6636)
    8:00 am to 8:00 pm Monday through Friday
    8:00 am to 6:30 pm on Saturdays EST
    Closed on Sundays and all nationally observed holidays.
    To contact Moen Canada call: 905-829-3400
    Ask for a new cartridge. If you have a problem click on back for assistance.
    Good luck, Tom
    Attached Images
     
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #3

    Sep 18, 2010, 08:23 PM

    Install the cartridge with the stem in the "open" position to let out the air trapped behind the cartridge. Otherwise you have to compress the trapped air to get the cartridge to seat.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Moen Cartridge really stuck [ 5 Answers ]

I am trying to replace the cartridge in my shower. I have the water turned off, everything disassembled (including u shaped clip), I have the T shaped cartridge tool. I was able to get the inside out of the brass housing but I cannot get the brass housing to move no matter what. The T shaped...

Removing a Moen Cartridge [ 1 Answers ]

I had the same problem with two units in my home. One was very stubborn, the other extremely stubborn. On the brass shaft, I added a washer that covered the brass body, then lots of washers until there were more than the shaft could hold (about 1/4" more). Finally added a washer that was large...

Cartridge removal tool [ 3 Answers ]

How do I use a cartridge puller tool to remove a cartridge from a bathroom sink faucet? Thank you

Moen cartridge [ 3 Answers ]

I changed my one handle shower cartridge by moen. This was not easy and had to break it apart to remove. I put a new one in and there was no pressure. I changed this one and got very little improvement. I had great pressure before it was just leaking any ideas??

Moen Cartridge Problem [ 2 Answers ]

Tvdave New Member Join Date: Mar 2007 Posts: 0 Moen shower cartridge I've read your responses to several folks concerning the Moen single handle shower cartridge and appreciate all the good information. I take it that since I am getting hot water to my sink and no hot water...


View more questions Search