Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Washing Machine Standpipe Height
[ 1 Answers ]
I am installing a washing machine in the basement and the sewage drain pipe is at a height of 5 feet off the floor. From everything I have read, the standpipe should be above the height of the washer tub and it should be 2" in diameter. Could I install the washer without having a external pump...
Corroded hot water feed to washing machine
[ 8 Answers ]
The water feed connection at the spicket is very corroded. It is in the inset in the wall and difficult to get a wrench on. I have used Liquid Wrench and WD-40 but cannot break it loose. Any suggestions?
Hot and cold water feed to utility sink
[ 1 Answers ]
What is the purpose of the one foot capped copper pipes on the utility sink.
Hot but no cold water to washing machine
[ 4 Answers ]
My washer will only fill up with hot water even though I have it on warm. When I try to turn on cold, water does not flow. I've taken off the hoses and run water through them thinking they were clogged but they're fine. I've turned on faucets that lead to washer and water comes out fine. I recently...
Error code F dL on my Kenmore HE3 Washing Machine
[ 1 Answers ]
When I try to start my Kenmore HE 3 Front loading washing machine it makes a severl clicking sound, not the normal "locked" sound, then I get the F dL error message. I have tried all the normal ways to get the door open but my dirth clothes are locked inside, the machine will not run and I get... View more questions Search
|