My symmons temptrol valve does not let hot water through. Actually it is just a dribble when put to all hot. I removed the spindle & seat then cleaned them but it was not much of an improvement. Should I just replace these parts?
Add your answer here.
Check out some similar questions!
Replace symmons spindle [ 2 Answers ]
I cannot get hot water from my Symmons Temptrol mixing valve. When I turn the handle all the way for all hot water, the water dribbles out of the spout. I suspect that some foreign substance has gotten into the spindle. How do I remove it for inspection, or replacement. Thanks.
Symmons valve replacement [ 0 Answers ]
There are two showers in my house and the one on the second floor produces hot water for about 30 seconds, unless we turn the heat up for about ten minutes and then take a shower. We have been told to replace the symmons valve including the housing unit. We tried just replacing the mixing valve...
The spindle needs to be replaced on the motor is there a replacement part [ 1 Answers ]
The spindle will not hold the fan is there anything that can be done the motor is fine
Symmons shower diverter spindle [ 0 Answers ]
Hi,I have just replaced my Symmons shower diverter spindle again(TA-25A)because of a leak and now have a new problem. I have to replace this diverter spindle every year or so because the plastic on the end by the o-ring cracks and it leaks water down through the first floor ceiling.The problem now...
How to replace symmons spindle [ 1 Answers ]
How do you remove old symmons spinde and replace it with a new spindle and diverter Handle??
View more questions Search