Ask Experts Questions for FREE Help !
Ask
    joanherrick's Avatar
    joanherrick Posts: 3, Reputation: 1
    New Member
     
    #1

    Jan 13, 2013, 03:41 PM
    Stanadyne faucet parts
    My shower has been dripping and the drip is getting faster.

    It is a single knob that you pull out to turn on the water and turn right or left for hot or cold.

    I took the knob and the round face plate off and went to Lowe's, they did not have the same thing ( its 20 yrs old) so I bought what the guy said would work.

    It did not. The guts of the knob do not match the piece sticking out of the wall.

    Now when I take a pair of pliers and pull the thing out I get water. And when I use the pliers to push it back in there is no drip.

    It seems to me that the knob original to the faucet was not pushing the thing all the way back far enough to turn the water completely off. ( broke the knob getting it off)

    So, I took the knob off the bathroom sink and put it on the shower with the center screw sticking out. So now when I take a shower, I have to push the knob in to turn off the water but you also have to push the screw in with your thumb. If I tighten the screw all the way down it leaks again.

    What can I do. The name on the face plate says standyne. Thank you for your help joan
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jan 13, 2013, 04:23 PM
    Stanadyne was bought by Moan many years ago. The reason for the leak is in the cartridge, not the handle. Moen guarantees their faucets for life. Call 1 800 BUY MOEN (1-800-289-6636).

    A couple different models of cartridges. You can describe faucet to Moen tech or you can remove your cartridge to determine which style you have.

    To do that, remove handle. Pull off the chrome cover surrounding the stem, remove the little horse shoe clip that holds the cartridge in. Pull the cartridge out. If cartridge is difficult to remove, reattach the handle and use it to pull the cartridge out.
    Attached Images
     
    joanherrick's Avatar
    joanherrick Posts: 3, Reputation: 1
    New Member
     
    #3

    Jan 15, 2013, 05:20 PM
    You are exactly right. I can't thank you enough.

    This site is the greatest.

    Thank you joan
    joanherrick's Avatar
    joanherrick Posts: 3, Reputation: 1
    New Member
     
    #4

    Jan 16, 2013, 05:52 PM
    I just put in a new cartridge and it works great. I want to thank you again for your help.

    Joan
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #5

    Jan 16, 2013, 06:48 PM
    You are very welcome. Come back anytime you think we may be able to help.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to repair a stanadyne shower faucet [ 2 Answers ]

We are having difficulty removing the chrome sleeve. It doesn't seem to just pull off. Could it just be heavily caroded on?

Stanadyne plumbing parts? [ 1 Answers ]

How to remove tub water spout

Fix leaking Stanadyne shower faucet [ 5 Answers ]

How can I get to the stem out to replace the washer?

Removing/replacing Stanadyne bath faucet cartridge [ 1 Answers ]

Greetings, I would like to replace the cartridge in a Stanadyne bathtub faucet, single handle. I have the water shut off and retaining pin out. Not sure what to do next since the cartridge does not appear to slide out readily. What is the next step? Thank you.

Removing screws in old Stanadyne shower faucet [ 2 Answers ]

How do I remove highly resistant screws within an old Stanadyne shower faucet?


View more questions Search