Ask Experts Questions for FREE Help !
Ask
    jsutherlin's Avatar
    jsutherlin Posts: 28, Reputation: 1
    New Member
     
    #1

    Jan 1, 2010, 10:03 PM
    Smooth out shower pan mortar
    The primary mortar bed of the shower pan was put down last week and has some surface damage from the plumber. It's only a couple gouges but I don't want to install the pan liner with the gouges since they may create an area that will collect water. What can I use to float over the gouges? Mortar? The gouges are about 2" wide and 1/16" - 3/16" deep. Thanks for your help.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jan 2, 2010, 08:04 AM
    Hi justherlin...

    Believe it or not, the plumber may have done you a favor here... :)

    Knock the high points down as smooth as you can with a chisel and a hammer and then install a TAR PAPER over the entire mortar bed before installing the liner. Make a smooth cutout/circle around the drain only. You don't want any of the liner to come in contact with any of the mortar... ;) You can fill the indents with a sanded cement if you want.

    Finally, don't forget to install small gravel rocks or similar around the WEEP HOLES in the drain assembly... this is critical to the way these sytems are designed to drain water away from the pan!

    Back to you..

    MARK

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing mortar shower pan [ 2 Answers ]

Hello. I am in the process of trying to redo an upstairs shower with no ready access from below. This began as I noted several lower rows of tile had come loose along the shower wall. I have removed the tiles and underlying greenboard which was present from the walls from the level of the ceiling...

Proper shower pan install utilizing exsting basement shower drain [ 6 Answers ]

I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...

How much mortar for a shower pan [ 7 Answers ]

I am building a shower pan. It is 36d x 30w. I am wondering how much mortar is needed for a pan this size. For both the mortar bed and the finish layer. I'm looking to buy pre mixed bags. Any feed back would be much appreciated for both quantities and type.:cool:

Smooth grout on smooth tile [ 5 Answers ]

We just grouted our bathroom wall tiles (smoooth white subway style pattern) with smooth white pre mixed grout. It isn't going in well and is now cracking and hardneing with bums and edges :( Do we have to do another coat or will that be too thick... it is showing some thinset and the edges of the...

Removal of Mortar Shower Pan [ 3 Answers ]

OK, we're in the process of a master bath remodel and I need to remove the mortar shower pan as we're expanding the size of the shower. What is the best way to remove the old base? Small sledge hammer and chisel? It appears to have a pretty standard construction (i.e. mortar bed, a plastic...


View more questions Search