Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Are all shut off water valves the same?
[ 1 Answers ]
Are all shut off water valves the same? I want to change two shut off valves and the house was built on the seventies and that is the reason of my question? I will be looking forward to hearing from you soon.
Replacing shut-off valves
[ 7 Answers ]
I'm wanting to replace my shut-off valves for my sink and toilet. If I cut off the current connection, I don't think I'll have enough room for a push connect 1/4-turn valve. The copper pipe is 5/8" wide. The copper pipe shouldn't be showing like this anyway, should it? What can I do? 7106
Shut off valves
[ 8 Answers ]
This is my problem. I have moved into an older home and I am doing some remodeling and when I went to remove the countertop and sink in the bathroom, I found that plastic piping came through the floor and directly to the faucets. I wish to put a shut off valve on the plastic pipe after shutting...
Access to shut off valves
[ 1 Answers ]
Does anyone know if there is a code in sarasota fl that says you must have access to shut off valves in your tubs and if so what is that code and where can I get a copy. Thank you[ Manny
Leaky Shut off valves
[ 3 Answers ]
Hi, I live in the Northeast and for the first time this past winter, I actually used the shutoff valves that lead to my outside water spigots. Now that I've turned them back on, they are leaking whenever the water line is open. I noticed they have nuts on the front... was I supposed to... View more questions Search
|