Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Repair shower diverter valve of Moen Monticello spout
[ 5 Answers ]
The shower diverter valve in the spout of my Moen Moentrol Single-Handle Tub/Shower spout has recently started leaking; i.e. when the shower is turned on, water now comes out of both the tub spout and the shower. This unit was an original installation in about 1999. I note that it has a slot on...
Replacing tub taps & diverter spout
[ 2 Answers ]
:confused: My tub spout is starting to give me problems, I would like to change it along with the taps, but the problem is the previous owner tiled the whole bathroom all the way around the room. Is it possible to replace them without doing some damage to the tiles?
Bath tub spout, diverter replacement
[ 1 Answers ]
I would like to replace the diverter or spout in my bath tub. The original is the slip on type with a hex screw at the back. The new one is threaded, is there an adapter I can use to make it work ?
Bath spout shower diverter failed
[ 1 Answers ]
The pull-up diverter in the shower spout just suddenly ceased working this morning. There is no change in the flow of water when it is pulled upward. Do I have to replace the whole spout or is there another way. The walls are tiled so I fear having to tear that out if I have to replace the spout. ...
Trying to replace Weird Size Tub Spout Diverter
[ 3 Answers ]
When I pull up my Diverter for my shower, It sprays a lot and cuts down on my shower's stream. So I decided to replace it yesterday. I determined that it is the screw on type and removed it. But when I took it off I noticed that there was a 1/2 inch copper pipe with a 1 1/4 inch thread attached... View more questions Search
|