 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need help with Glacier Bay shower faucet
I have various Glacier Bay three spigot shower/tub faucet combos in my home. They use the 3S-11H and 3S15C replacement cartridges from Danco as replacements for the hot and cold water. These cartridges are then attached to an extension that is made of nylon and a brass stem with a D head that will finally attach to the handle which is made of white ceramic and chrome. The extension part broke and after visiting 4 Home Depot stores every employee showed me a Danco replacement for a Delta faucet which they said would solve the problem. The extension was too short as the brass stem portion needs to be at least 2" in length. They say that this has a lifetime warranty and yet no one has at minimum a catalog to be able to find the part. I need help. Thanks.
|
||||
|
||||
|
Unless you have receipt or product information, go to Home Depot find a similar plumbing product, open, get warranty contact phone number. Call.
They are actually pretty good on warranty but don't make it easy for you to find them. Their Glazier Bay product are made by different companies but Danco is not one of them. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi I recently bought a house and the showers were not giving out any hot water. When I take the valve out the hot water has lots of pressures and gets hot. So I know that the valve is the problem on both showers. Can someone show be tell me how to fix it?
Where do I find the cartridge replacement for a glacier bay shower faucet model number F1AA4217BNV?
I have a glacier bay single handle shower faucet-at mid range the pipes start to rattle. The plumber says it is a cartridge needed to be replace-how do I get the part?is there a web site
No cold water on glacierbay faucet but the hot is working. Hot and cold water mixter three handle faucet. One handle is on and off ,one tub or shower and one mixing the hot and cold water. I do not have the model number.
I have model number 213513 GB faucet. We are trying to figure out how to mount the faucet body to the wall studs/frame. Any proper way of doing this. The 888 number for help got me a woman from India who could barely speak English. She mentioned straps to install? Any advise is appreciated. Thanks
View more questions Search
|
