Ask Experts Questions for FREE Help !
Ask
    jtr123's Avatar
    jtr123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 27, 2007, 07:06 PM
    Diverter Valve
    I was washing the dishes and when I went to press to spray nozzle, no water came out. Then when I went to use the faucet, no water came out as well. I think this may have to do with the diverter in the spray nozzle? What are your thoughts? And how do you remove the spray nozzle?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 28, 2007, 12:07 PM
    First I would check the aerator screens for trash. If they were Ok Iwould shut the water off and open up the faucet. Check the inlet ports of the cartridge for blockage. Now ploace a pan over the open faucet and turn the water back on to flush out the supplies. You should have a full stream, if not then click on back. Regards, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Leaking shower diverter valve [ 15 Answers ]

We have a three knob shower system. When the water runs into the tub a significant amount of water runs out of the central diverter valve (?correct term) knob. When this is turned water is diverted to the shower head. How does one determine how to remove and replace the diverter assembly, or could...

Diverter valve for Moen faucet [ 2 Answers ]

Hi, I need to replace the diverter valve (1225) on the kitchen faucet. Do I need to remove the entire faucet to do this? If so how do I do this? Thanks

New Diverter Valve not working [ 10 Answers ]

Hi, I have read a couple of the threads on diverter valves and thought I might ask this question for some help. Ok here is the background on the problem and how we went about solving it. First this is a house that was built in 1971 so nothing new. The bathroom on the main floor has a three...

Diverter valve problem [ 1 Answers ]

Hi All, Had a problem with the diverter valve knurled end being worn, so I changed the whole valve(Danco replacement for Sayco). With the new valve, I have low pressure & also when putting water towards the shower head, it still comes out the lower spicket. How does that happen. Thanks in...

Peerless Diverter Valve [ 3 Answers ]

Is there anyplace on the web that would have an internal drawing of a Peerless single-lever faucer? My diverter valve is sticking, and before I take it apart, I'd like to know what to expect inside. Thanks Jim

View more questions Search