Ask Experts Questions for FREE Help !
Ask
    wormy78's Avatar
    wormy78 Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Feb 26, 2011, 12:52 PM
    Has anyone seen a harvard gate valve red handle?
    It's a red handle gate valve with harvard wrote on the side need to find replacmet parts
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Feb 26, 2011, 01:44 PM

    What part do you need?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Feb 26, 2011, 02:08 PM

    Answer Ballenger's question, but any Harvard gate valves I ever purchased were back in the 70s/80s and were only available at a PLUMBING SUPPLY STORE, so I would recommend that you check in at your local supplier and see what they can find for you.

    Otherwise, as I am sure you are aware of, you may do well to simply replace the entire valve... not so hard in most cases if you use a UNION fitting to make the swap out... ;)

    Mark
    wormy78's Avatar
    wormy78 Posts: 8, Reputation: 1
    New Member
    		  
    #4

    Feb 26, 2011, 05:30 PM
    Comment on ballengerb1's post
    The gate and the stem for two inch
    wormy78's Avatar
    wormy78 Posts: 8, Reputation: 1
    New Member
    		  
    #5

    Feb 26, 2011, 06:07 PM
    Can anyone suggest where to get new stem and gate?
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #6

    Feb 26, 2011, 08:10 PM

    That's very hard to match... You will be better off replacing entire valve... Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewer Gate/Check Valve [ 16 Answers ]

Plumber recommending we install a sewer gate check valve system to avoid future back-ups when huge rains/thaws overwhelm storm sewer system. Has anyone used these - recommend? Plumber guarantees we will have no future problems.

How to make a gate valve [ 0 Answers ]

Cara masining gate valve menggunakan mesin cnc dan programnya

How to make a gate valve [ 0 Answers ]

Which way do I turn my gate valve to on [ 4 Answers ]

I reinstalled my water softener only to find it leaking so I deinstalled it again but can't remember which way to turn the gate valve back on in the airing cupboard so that water flows again. Is it clockwise or anti-clockwise? Can you help please.

Leaking gate valve [ 6 Answers ]

I have an 11/4" brass gate valve on the outlet of our boiler that is leaking on the top. Not out of the stuffing box, but just below out of a seam. What are the chances that there is some sort of sealant that I can put on there to stop the drip? Thanks in advance for your help! Bill

View more questions Search