Ask Experts Questions for FREE Help !
Ask
    teoacct's Avatar
    teoacct Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2010, 07:18 AM
    Is the faucet handle installed correctly?
    I turn my Moen single handle faucet to "C" and get HOT water. I try turning it to "H", but the handle will not turn that far. How can I fix this? Did the builder install it wrong? I am stuck with HOT water and no cold water, even if handle is turned on "Cold" side! Help Please!
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #2

    Oct 25, 2010, 08:51 AM

    Your faucet needs final adjustment after installation. Do this:

    1. Remove handle
    2. Turn stem 180 degrees around
    3. Remove "Anti-Scald" ring
    4. Re-install handle

    See if that works for you... Back to you... Milo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Discipline-Did I handle this correctly? [ 57 Answers ]

Hello everyone. Thank you in advance to everyone who reads and shares their opinion on this. I am looking for some support (or even if you disagree) on a punishment that I gave to my daughter for disobeying me. Here is what happened: I was on my way home from work yesterday (she had the day off...

I installed a new glacier bay model f2010210cp double handle shower faucet. [ 0 Answers ]

. It has a steady stream of water coming out when I connected the water lines. The flow increases when you turn on the faucet. I have looked at the seats and valves... all are clean and in good shape. I would like to know if someone has some info for me. It will not shut off completely. I am trying...

How do you change from a 2 handle faucet to a one handle? [ 3 Answers ]

I have a delta bathtub faucet, shower with 2 handles. I'd like to change it to single handle. What is involved in changing it out? I have chrome but want to put in rubbed bronze.

Truetype font correctly installed , but not showing in OpenOffice2.3? [ 1 Answers ]

Hi there. Hope somebody can help me out. I have had a quick look around on the net but it all seems very complicated for what I thought would be a very simple job... I have today installed Amazone BT Truetype font. It shows in my fonts folder in the control panel , and I can use it in...

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

View more questions Search