| 
 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Replacing Sink Air Vent
 [ 3 Answers ]
 I am planning to install a new kitchen sink. The present sink has an air vent installed in the "fourth" hole (Chrome plastic vent). I want to install a sprayer in that hole. The dish washer and disposal are connected under the sink into the vent valve by a y connector. If I used that hole for the... 
Replacing Pop-Up Assembly in Lavatory Sink
 [ 38 Answers ]
 I have had trouble with rust forming around the bottom of my white porcelain sink where the drain plate is from the old pop-up assembly. I am about to replace it. Would it be best to use a chrome-plated plastic one now or a brass one to keep rust from forming again? 
Replacing a bathroon sink with a utility sink
 [ 1 Answers ]
 I want to replace my bathroom sink with a utility sink but the plumbing drain pipes are smaller than the utility sink fittings. Do I have to cut them off ,they seem to be glued on very tight.is there an adaptor I can use .I have no plumbing knowledge at all(as you can see)and little money to spend.... 
Replacing Diverter in Sink sprayer
 [ 1 Answers ]
 Please explain how to replace the diverter in a Peerless sink sprayer. Thanks! 
Replacing Sink Base, need a double sink?
 [ 1 Answers ]
 Hello. I just bought my first condo, and immediately changed the appliances (my fridge is now larger than the previous one at 30 inches wide (normal I know). I am not replacing the cabinets. I have limited space on one wall, so I need to DOWNGRADE from a 36 inch SINK BASE to a 33 inch SINK BASE.... View more questions Search 
 |