Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to wire a 20-40# pumptrol pressure switch for a deep well?
[ 4 Answers ]
Hi all: My daughter asked me to wire power to her deep water well... I will be using #12 2 wire w/ ground through a 20 amp circuit breaker to a 20-40# pumptrol pressure control switch... The pumptrol has four terminals in a line, the two end terminals are marked "L" and the two center terminals are...
Square d pressure switch
[ 2 Answers ]
Went to check my sister in laws water pressure as they had none. I found that the breaker was tripped at the water pump site and there was on 15# of pressure on the gauge. Reset the breaker and the pressure built up to about 60psi then settled down again to 40. It is a square D 30-50 pressure...
Square D Pumptrol Switch not "cutting in"
[ 6 Answers ]
I have a Square D Pumptol switch on the pump/pressure tank at my new house. I've never worked with any of this technology before; it's my first home purchase (yay!) and the only home I've ever lived in that didn't have city water. The pressure switch cuts off successfully at about 55 psi, but...
Square D pumptrol
[ 1 Answers ]
I have an air compressor with a square d pumptrol pressure regulator. The compressor stops at 100psi, and restarts at 60psi. How do i adjust the pressure regulator to restart at approx 80psi, without changing the shutoff press?
Square d pumptrol box shutting off
[ 1 Answers ]
While watering my garden or lawn my pumptrol box shuts off... and I have to push contacts together due to complete loss in water pressure. Pump comes back on and water pressure is right there so I know I am not running out of water and I checked blatter tank for air pressure... tank was full with... View more questions Search
|