Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Fire Taping a sheet rocked garage
[ 4 Answers ]
Hi, The guy I hired to sheetrock the addition we are building did what he called fire taping the walls in the garage. I have searched and searched to find the proper steps to fire tape a garage to no avail. What I need to find out is if what he did was correct. He taped the seams and...
Laundry standpipe overflow
[ 10 Answers ]
The standpipe that our washing machine drains into recently started overflowing. It's only a small amount at a time, creating a tiny puddle that runs in front of the machine. It seems to happen during the rinse cycle. There's no noticeable odor or sudsing. Any idea what could be causing this...
Taping cement board joints
[ 6 Answers ]
Does anyone know what kind of compound to use on cement board?I've checked the USG FAQ site and they recommend 'glass tape for the joints, I see no mention of compound, other than to say that joint compound is not acceptable because cb is generally used in damp areas and the joint compound won't...
Wall standpipe overflow
[ 3 Answers ]
The wall standpipe for my 10 year old washer machine overflows as the washer discharges water during the cycle. This problem only happened very recently. I tried to run the snake down the pipe but it only went about 2 feet and couldn't go any further. I also noticed the pipe is very rusty as I...
Rooftop Standpipe perhaps?
[ 6 Answers ]
I have read through most of the plumbing problems and haven't seen exactly my situation, so here goes. Here are the facts as best as I can describe. Block home built in 1968 as 2 bdr. 1 bath Addition of a bedroom and additional bath circa 1978 (fireplace too.. another issue) Secondary... View more questions Search
|