Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
To wet test a sewer drain install, do you plug the sewer pipe as it enters the septic
[ 2 Answers ]
Three questions. For a sewer drain wet test, do you plug the drain as it enters the new septic tank? Where does the 10' wet stack go and can you change direction 45 degrees under a slab in the main sewer drain line ?
How do you connect the kitchen sprayer hose to the copper pipe under the sink?
[ 1 Answers ]
The kitchen sink has a hole on top for installation of a sprayer. It also seems to have an independent copper pipe with a valve underneath however, there are no threads on this copper pipe for threading a tube from the top to the copper pipe. The copper pipe is capped.
How do I connect a rainwater down pipe to a sewer?
[ 3 Answers ]
A strap Boss is only for 40mm pipe, rainwater pipe comes in 65mm how else can they be connected?
Brass Closet Flange for Metal Sewer Pipe
[ 3 Answers ]
I am installing a new toilet and found that the existing closet flange was broken. I don't recall how the closet flange was installed and I'm not sure how to put in the new one. I have a 3" metal sewer pipe. The rim of the sewer pipe measures 5" and the actual opening measures 3". My plumbing...
Metal sewer pipe
[ 1 Answers ]
Sewer pipe is metal to the toilet Is there a flange that can be added to the metal pipe? To hard to replace with pvc piping- homes built in the 40's and crawl space is very small Toilet screws are only through the wood no flange we want to add a flange Thanks View more questions Search
|