Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Offset Closet Flange for Cast Iron?
[ 6 Answers ]
Hi, My cast iron waste pipe centerline is 11 inches from the finished wall. It worked with my old toilet (since disposed of) but won't work for my new Kohler. Is there an offset for cast iron that is easy to install? BTW, the floor was tiled and the old closet flange had an extra flange as a...
Cast iron toilet flange the bolt holes will not hold how do we fix it and the flange
[ 1 Answers ]
We have a cast iron flange and the bolt holes are not useable can we cut off the top and add a new plastic flange
Cast Iron Toilet Flange
[ 2 Answers ]
I am replacing my toilet and found that the cast iron toilet flange is broken where one of the bolts that hold the toilet should go. This was a crescent shaped slot, but the outer rim is broken and missing. I was going to replace the flange, but can't see how it is fastened to the drain pipe. ...
Rotating Toilet 90 degrees on Cast Iron Flange
[ 1 Answers ]
I am remodeling a bathroom in a 60s vintage home with adequated crawl space. I need to rotate the toilet flange 90 degrees to install the new toilet as the orientation has changed with the remodel. The materials of construction for plumbing is cast iron. I am keeping the same elevation of floor....
Cast Iron Toilet Flange Problems
[ 3 Answers ]
Hi, I have read forums on having the cast iron toilet flange being too high after tile removal. I have some additional questions on this: 1. After removing the Thick set Mortar, the flange is 1 " above the subfloor. Can I just add different types of underlayment to reach the flange (i.e.... View more questions Search
|