Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need help replacing toilet flange
[ 9 Answers ]
I'm working on a job in a 60's condo that has a cast iron toilet flange attached to the pipe of the same material. It is about 2" above the subfloor, somebody elses crapy botch job that I'm fixing, and I need to bring it down to the new level. How do I remove the flange without damaging the pipe to...
Toilet flange above floor level
[ 56 Answers ]
I've seen plenty about the opposite problem - maybe this is something less common: my toilet flange is above the anticipated floor level. I recently removed old tile from the bathroom floor, planning to install new tile. In so doing, I discovered that the old tile was set on about 3 inches of...
Replacing a Bent Flange
[ 5 Answers ]
Hi, we are completely remodeling our bathroom and are almost to the steps of installing the new toilet. When we test fit it to make sure there would be enough space between it and the vanity, the toilet rocked pretty badly. We did not have a wax ring underneath when we test fit it, but upon...
Toilet flange below the floor level- URGENT
[ 3 Answers ]
Hi Guys, I just quickly reviewed all postings here trying to see if I can find an anwer to my question, but some things are too difficult for me to understand, as I am not familiar with the whole subject. I hired a plumber to install a new toilet in half a bath in the basement. The old toilet...
Replacing a toilet flange with a lead connection
[ 6 Answers ]
I am about to pull up my old toilet and take a close look at what's underneath. I am also going to go over the original plank sub-floor with fresh 3/8" ply (followed later with thin lauan for eventual linoleum) there is a visible floor patch from an old repair. Given the fact that there has been a... View more questions Search
|