Ask Experts Questions for FREE Help !
Ask
    Larrynml's Avatar
    Larrynml Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 12, 2005, 12:20 PM
    Shower problem
    I have a Kohler self contained (one piece) shower that has leak in drain. It is on cement slab. Aside from gluing it, etc. is it possible to cut around the drain on the white area and put a new drain in place of it and maybe putting some type of tile around it where I cut? Other than that, I plumber glue it and it has started leaking again. I was told that I would have to replace entire shower.

    Larrynml
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Nov 12, 2005, 03:28 PM
    Hi Larry, Check out WingTite replaceable shower drain at,
    http://www.plumbrite.com/?page=faqs&...357b13eaa0aea5
    Read the FAQs and then click on installation to find out if this is what you need. Good luck, Tom
    Larrynml's Avatar
    Larrynml Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 12, 2005, 05:32 PM
    Thanks...
    I am not sure it will work, but it looks like it might. I will ask a friend who is good at this stuff to see what he thinks.

    Sincerely,

    Larrynml
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot Water problem in shower [ 5 Answers ]

This one has me stumped... Our house is only 3 years old, and so far we've not any plumbing problems. Today I noticed that the shower in our spare washroom (very rarely used) was not working properly. When you turn on the cold water its OK, but as you turn the knob to the hot the water pressure...

Rain shower head & handheld shower head problem [ 4 Answers ]

I have a shower with 2 pipes for showers heads (one on the wall in front, and one on a side wall). The wall in front has a rain shower head on it. The wall to the side has a hand held shower head attached. The pipe with the hand held shower attached has a push button valve to turn the handheld on...

Another shower low pressure problem [ 3 Answers ]

I have read some of the other low pressure shower issues posted here but none seem quite the same. I don't have a one valve or three valve system. Mine is a two valve shower system... hot and cold. It is a shower, not a tub/shower. My problem is that the hot water pressure is really bad. I...

Shower diverter problem [ 3 Answers ]

I have a Central Brass 3 handle tub/shower valve. It is old style with the larger seats. I replaced both valves, the diverter, and the seats. Now water will leak out of the shower in varying amounts if the water valves are opened most or all the way, even though the diverter is in the tub...

Help with possible shower problem... [ 7 Answers ]

Ok, I'm not sure if this is a problem or not, hopefully the later. I have absolutely no plumbing experience so please forgive me if I use the wrong descriptions for things.. We have a fiberglass shower and I have noticed that the strainer is not the same size as the preformed hole in the...

View more questions Search