Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower Diverter - Hot/cold handles hard to turn
[ 4 Answers ]
My shower has the standard 3 (not sure of brand) valve set up. All of the valve handles are very hard to turn and I am wondering is there a way of loosening any part of the stems to reduce the tension? I am not sure but I think a long time ago I read that when the stems are installed in a closed...
Replaced shower drain
[ 1 Answers ]
Hi, I just cut a hole in my ceiling and replaced the shower drain. I used a plumber's putty on the top and locked in the washer on the bottom. Should I have used sealant at any spot on the install, or is the putty sufficient? After a day or so, I was able to tighten the nut more; is there...
Replaced Shower valve problem
[ 2 Answers ]
This SHOULD have been simple... I replaced HOT and COLD valves and the DIVERTER on 2 showers. They were old and needed to go. Great care was taken to match and get the proper replacements. The COLD on each shower works well. The HOT leaks out the center post a bit in each shower. The...
Shower leaking (shower drain pipe?)
[ 2 Answers ]
Hi, I will apologize up front for my lack of knowledge in plumbing... but I know enough that I believe that I can fix this problem without having to add on the expense of calling a plumber. I noticed that there were a lot of ants coming into our bathroom. After laying traps and having no...
Replaced Main Water Line, Now Shower Line Is Clogged
[ 3 Answers ]
We had a leak, so we had the water line and sewage line from the house to the street replaced. Now we have no water in the shower. Some debris most have clogged up the line coming into the shower. All the other lines are fine. My Dad is somewhat of a handyman and wants to fix the problem... View more questions Search
|