Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Proper shower pan install utilizing exsting basement shower drain
[ 6 Answers ]
I am remodeling a basement bathroom. I demo'd the shower and its tile to reveal rotted framing. I believe this is due to an improper or (more likely) not existent shower pan -- there was no water proof membrane between the tile/thinset and the framing. Can I build a proper shower pan...
Install shower deck in a copper shower pan
[ 1 Answers ]
I already have a copper shower pan installed. I need to know do I just put decks mud in, or should I put in a pre-slope layer, then a vinyl liner, then final deck mud. In know a vinyl liner alone would have been best, but the copper is already there. I would greatly appreciate any advice with...
Build Shower Platform & Install Above Ground P-Trap in Basement Shower
[ 1 Answers ]
Hello, I'm new to this site. I tried to find the answer in previous posts and did find some great info, but I still have some questions :) This is what I want to do: Install a corner shower with dimensions 36" in x 36" in the basement, build a platform, & add an above ground p-trap. ...
How can I fix this bad shower pan install?
[ 1 Answers ]
From what I can tell my tile guy broke just about every rule in the book when building my shower pan and curb: 1. No pre-slope for liner. (Actually, 6 of 7 tilers I interviewed for the job said they didn't usually build a pre-slope but I built one myself before I let them lay the liner). 2....
Best way to install fixed shower head and personal shower
[ 4 Answers ]
I am installing a new shower setup. I want to install a fixed shower head as well as a hand held personal shower with hose. On the Kohler website they sell a diverter valve with some sort of backflow valve for this purpose. I have a friend who just had this done and he has no diverter valve just... View more questions Search
|