Ask Experts Questions for FREE Help !
Ask
    motiman's Avatar
    motiman Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Apr 5, 2010, 08:31 PM
    rheem hot water heater troubleshooting
    I have a rheem hws model no 111160 installed jan. 2002 it has a small leak from around the element seal and seems to leak overnite. I tightened the bolts which helped but it still leaks with some condensation on the cover.FONT]
    CHayn's Avatar
    CHayn Posts: 177, Reputation: 10
    Junior Member
    		  
    #2

    Apr 6, 2010, 04:14 AM

    Can you post a pic? I am not familiar with this Australian model.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Apr 6, 2010, 06:16 AM
    Quote Originally Posted by ;
    it has a small leak from around the element seal and seems to leak overnite. I tightened the bolts which helped but it still leaks
    Doesyour water heater have the flange type elements? (see image)? Let me know, Tom
    Attached Images
     
    motiman's Avatar
    motiman Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Apr 9, 2010, 12:37 AM
    Yes it has both seals
    motiman's Avatar
    motiman Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Apr 9, 2010, 12:57 AM
    Quote Originally Posted by speedball1 View Post
    Doesyour water heater have the flange type elements? (see image)? Let me know, Tom
    I installed a new pressure relief valve and retightened the seals and so far it has stopped leaking
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #6

    Apr 9, 2010, 07:39 AM

    Hey Motiman,
    Thanks for the update. Tom
    motiman's Avatar
    motiman Posts: 5, Reputation: 1
    New Member
    		  
    #7

    Apr 21, 2010, 01:12 AM
    The leak turned out to be a leaking cylinder after 8 years since installation. I had the water cylinder replaced and so far OK. Thanks for the advice. motiman
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trouble shooting Rheem hot water heater [ 13 Answers ]

How do I figure out what part is wrong with my Rheem Power Vent S/N 1094 D22371: which is powered by the RobertShawcontrols. The water heater won't turn on the gas to heat it up. I think it's the Ingition Control Justiceair

Rheem Hot Water heater lockout [ 3 Answers ]

Hi. I have a Rheem Power Vent hot water heater, model PVW50-36FV, I was painting in the basement with little ventilation. The far right and left LED lights indicate the FV sensor detected the presence of flammable vapors. The unit is shut down and in lockout mode. How do I unlock this unit? Any...

Rheem water heater troubleshooting [ 1 Answers ]

New reem water heater worked OK for a few days and now stopped working like would not lite up and heat the water, it happen before and I just unplug the unit and repluged it to reset it and would work. This time it does not want to lite up

Troubleshooting a Rheem manufactured home water heater [ 1 Answers ]

I have a Rheem Model #71-305 electric water heater (240 volts ac only). I am trying to figure out if I need to replace the breaker switch that keeps tripping or is it a part on the water heater itself? I have had hot water and everything should be working right, no problems with water quality, but...

View more questions Search