Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Low hot water pressure through the whole house even ater replacing water heater
[ 2 Answers ]
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
Electric Hot Water Heater still doesn't heat after replacing thermostats
[ 2 Answers ]
Electric Hot water heater was working. Turned well pump off and went on vacation for three weeks. Got back and found I had no hot water. Call Whirlpool, their heater, they told me to replace both upper and lower thermostats after I gave them some voltage and resistive measurements. Replaced...
Very low water pressue to house after replacing leaking valve on water heater
[ 1 Answers ]
I replaced the leaking valve leading to the hot water heater, drained the hot water heater, turned the main valve to the house back on and now have very low water pressure to the house (cold and hot) The house has galvanized metal pipes... HELP please!:confused:
Replacing Power Vent Water Heater
[ 1 Answers ]
I recently bought a house and it has a power vent style water heater that I need to replace. The fan and vent seem to be in working condition. My question... since these style heaters are twice the price can I buy just a regular gas water heater and transfer the power vent from the old one? ...
Electric Hot Water Heater - replacing anode rod
[ 3 Answers ]
What is the procedure for replacing the anode that is screwed into the top of an electric hot water tank? In theory it's supposed to be easily replaced, but in real life getting any fitting unscrewed after many years can be a risky. Any tricks or just brute strength? I haven't change it. I... View more questions Search
|