I'm working on a job in a 60's condo that has a cast iron toilet flange attached to the pipe of the same material. It is about 2" above the subfloor, somebody elses crapy botch job that I'm fixing, and I need to bring it down to the new level. How do I remove the flange without damaging the pipe to...

The toilet in our master bedroom was leaking around the floor. I turned the water off, flushed it one last time to get the water out of the tank, and called the plumber, who stopped by today. I wasn't there, but my g/f took a bunch of notes. He unbolted the toilet and pulled the flange out...

Okay, so I'm renovating my bathroom and running into some issues with the old plumbing. Here is a link to some pictures of the situation which will do a much better job at describing things than I can. Picasa Web Albums - Jonathan - plumbing Obviously the ideal situation would be to...

Hello, I have a PVC toilet flange without the ring that goes on the outside. I am trying to snap a new ring onto it but it just won't go on it is very frustrating. I push and push and use a rubber mallet and it just won't go on. Does anyone have any tips on getting this ring on? Thank you.

I was replacing my toilet and found that my flange was rusted so much that I couldn't get the flange bolt on one side to lock into the flange so I must replace the flange. It's made of metal with ABS and obviously is glued into the ABS sewer pipe riser. I'm assuming that I need to get underneath...