Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Piercing saddle valve for ice maker
[ 16 Answers ]
I want to install a water supply line for the ice maker in a new refrigerator. Are the piercing saddle valves safe? I am worried that it might leak after a while. Is it better to install a real brass T with a 1/4 inch valve? Also, I noticed a recommendation on this site to tap the HOT water...
Replacing Water Supply Valve for Sink
[ 10 Answers ]
I am replacing the water supply valves for a sink fixture with new decorative supply valves. I've got the valves removed from the wall, however, the old nut that goes around the copper pipe from the wall (that connects the valve) is not coming off. I know there is a little brass ring that goes...
Replacing Gas Oven Valve
[ 2 Answers ]
I recently had an employee from the local gas company in my kitchen and he looked at the shut off valve for my gas oven. He suggested I call a plumber and change the valve because it was very old and prone to failing. What are the best types of gas shut off valves that I should ask a plumber to...
Saddle valve sizes
[ 1 Answers ]
Does one size saddle valve fit 1/2 & 3/4 inch copper pipe? Can you replace a leaky saddle valve with a new one in same location?
Replacing Water Supply Valve for Toilet
[ 2 Answers ]
I have a water supply valve that supplies water to the toilet. The valve is not made with a removal flex line fitting. Instead it has a galvanized flex tube that is a valve and tube combo (1 piece) with a valve shutoff handle. You can see where I am going with this... I want to change it out... View more questions Search
|