Ask Experts Questions for FREE Help !
Ask
    lal56's Avatar
    lal56 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 29, 2011, 07:34 PM
    Replaced seats, stem assembly, and the spout and still leaking from back of spout
    We replaced the seats, stem assembly, and spout and our tub is still leaking from back of spout. It only leaks when the handles are turned on. It leaks with both the hot and cold, when just the hot is on, and when just the cold is on. If everything is shut off, it stops. What could be the problem now?
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Dec 29, 2011, 07:51 PM
    See the images and tell us which of the spout did you install, Thank.

    John
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Dec 30, 2011, 06:19 AM
    My bet's on the slip on spout. This happens all the time. The installer fails to sand off the burr on the end of the copper stub out. When he slips on the spout the "O" ring catches on the burr and gets pulled out of position. Hence, the leak out the rear. The solution would be to remove the spout and reposition the "O" rings. Sand off the burr on the stub out, moisten the stub out and reinstall the spout. Note, For a professional looking job Caulk the spout and tile with Dap White Tub and Tile Caulk. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replaced valve seats on diverter and stem... water still runs from tub [ 2 Answers ]

Replaced all three stems on tub/shower and replaced seat on diverter valve... water still runs from tub spigot and shower at the same time

Leaking Shower/Bath Faucet. Replaced Stem, Assembly [ 0 Answers ]

Hello, I have leaking in my bath/shower faucet. It is a Danco kit. I believe the original was Bradley-Cole. After removing the stem, my old one had a hole on the end rubber piece. So I was pretty confident replacing it would fix it. After replacing it a pretty hard stream went to completely...

Spout Flange for Price Pfister Shower Spout [ 4 Answers ]

Checking to see if they sell the Spout Flange separately for the Pfister Shower Diverter Spout. I have the spout and it is in great condition. Dalton.

Spout Leaking [ 3 Answers ]

The spout in my tub shower combo only leaks when I pull knob for shower. What wrong billgay

Leaking tub spout [ 2 Answers ]

I have a leaking tub spout. So I replaced it with a new one and it is still leaking. What do I do?:confused:

View more questions Search