Ask Experts Questions for FREE Help !
Ask
    cmacme2004's Avatar
    cmacme2004 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 21, 2010, 02:47 PM
    Replaced points still no water why
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Oct 21, 2010, 03:26 PM

    Do you have power to the control box? Does yhe pump hold prime? Is the tube from the pump to the control box clear? Did it work before you replaced the control box? Back to you, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I hear water running after plumber replaced relief valve in my hot water heat system [ 0 Answers ]

We never heard this noise before now. How do I fix this? It is driving me BONKERS. I purged the system at all radiators and get nothing but water out. I did this with and without the pump running.

How would the boiling and freezing points of distilled water and sea water compare? [ 1 Answers ]

How would the boiling and freezing points of distilled water and sea water compare?

Replaced water heater, still receiving luke warm water,Why? [ 19 Answers ]

:(At first me and my husband started with replacing elements and thermostats on our current water heater, due to the fact we wasn't receiving hot water. ( It would be luke warm to cold quickly.) Didn't work. So, we purchased a new water heater and had it installed by an experienced friend of ours,...

Dip Tube replaced due to flakes in water, how to clean out hot water tank? [ 1 Answers ]

We have the issue where we are getting plastic flakes in our water, which stop up the water flow at the faucet. We did some research and found it was most likely caused by the dip tube being eroded, and we had it replaced with our home warranty. However, the repairmen who installed the new...

Replaced electric water heater Atlanta area, but no hot water [ 14 Answers ]

The old water heater died. Bot one (38 gals) at HD. Installed exactly like the old one was as follows--3 CPVC pipes come out of wall. Two are joined. Before they are joined one has a valve. After they are joined there is a second valve. The pipe is connected to the cold side of the heater using...


View more questions Search